EasyManua.ls Logo

Smeg DOSCA36X - Removing the Door Seal; Removing the Internal Glass Panels

Smeg DOSCA36X
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions for the user
EN
32
11.3 Removing the door seal
To permit thorough cleaning of the oven,
the door seal may be removed.
There are fasteners on all four sides to
attach it to the edge of the oven. Pull the
edges of the seal outwards to detach the
fasteners.
11.4 Removing the internal glass panels
The glass in the oven door should always be kept thoroughly clean. For easier
cleaning, the door can be removed (see 11.2 Removing the door) and placed on
a canvas.
The glass panels of the door can be completely removed by following the
instructions provided below.
Warning: before removing the glass panels, make sure that at least one of the
door’s hinges has been locked in the open position as described in “11.2
Removing the door”. This operation may have to be repeated during the glass
removal process if the door is accidentally freed.

Related product manuals