33
Removing the internal glass panel:
to disconnect the glass securing pins:
• Lift the rear part following the motions
indicated (1).
• Lift the front part following the motions
indicated (2)
• Remove the middle pane by lifting it
upwards;
Cleaning:
• Clean the external glass panel and the
panels which were previously
removed. Use absorbent kitchen roll.
In the case of stubborn dirt, wash with
a damp sponge and neutral detergent;
Replacing the glass panels:
• Replace the panels in the reverse of
the order in which they were removed;
• Centre and insert the 4 pins secured
to the internal pane into their seats on
the oven door using light pressure.
To Next Page
Loading...
