Use
11
3.2 First use
1. Turn on the espresso machine using the
ON/OFF switch (1): the lights of the
three buttons (2), (3) and (4) will flash in
sequence.
2. Lights (2) and (3) will flash to indicate
that the machine is reaching the pre-set
temperature. The espresso machine is
ready for use as soon as the lights stop
flashing.
3. Place a container under the hot water/
steam wand (4).
4. Turn the steam valve (5) to the
position and dispense 1/2 cup of water.
5. Turn the steam valve (5) back to the
position.
6. Attach the filter holder by aligning the
handle with and turning it to the
right to the position.
7. To rinse the machine’s internal circuits,
place a container under the coffe spout
and press the button.
8. Repeat this procedure 5 times.
Make 4-5 espressos or 4-5
cappuccinos to obtain a
satisfactory result.
To Next Page
Loading...
Need help?
General
