Smeg FL224APZD - Installation and Connections

183000
• Place the appliance in dry and well aired room. The applian-
ce operates best at temperature ranges indicated in the chart
below. Relevant class of the appliance is indicated on the
rating plate.
Class Ambient temperature
SN (subnormal) from + 10°C to + 32°C
N (normal) from + 16°C to + 32°C
ST (subtropical) from + 16°C to + 38°C
T (tropical) from + 16°C to + 43°C
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base. The
appliance is fi tted with adjustable feet on the front side, used
to level the appliance (certain models only).
• Avoid exposing the appliance to direct sunlight or heat sour-
ces. If this is not feasible, install insulation plate between the
appliance and adjacent heat source.
• The appliance may stand independently or you may incor-
porate it into the kitchen cabinet. Be sure to leave enough
space for cooling of condenser (distance from the wall or the
opening should be 200 cm
2
). Distance to the cabinet above
the appliance should be at least 5 cm.
After the installation, the appliance mains plug should be
accessible!
Selecting the locationSelecting the location
Positioning the
appliance
Positioning the
appliance
5
Installation and connections