What to do if my Smeg Hob switches off after 10 seconds?
If your Smeg Hob switches off after 10 seconds, it might be due to continuous key activation caused by water or a pan on the control panel. Remove any water or the pan from the ceramic glass surface and the control panel.
Why does my Smeg Hob keep switching off?
If your Smeg Hob switches off, it could be due to the internal temperature of the electronic parts being too high. Allow the hob to cool down and ensure it has sufficient ventilation. If the issue continues, contact After-Sales Service.
Why does the cooking area on my Smeg Hob keep switching off?
If the corresponding cooking area of your Smeg Hob switches off, this could be due to using an empty or unsuitable pan, the pan or ceramic glass surface temperature being too high, or the electronic component temperature being too high. Allow the hob to cool down. Use a suitable pan and avoid heating empty pans.
What to do if the cooking area on my Smeg Hob switches off?
If the corresponding cooking area of your Smeg Hob switches off, it might be because you are using an unsuitable pan that is losing its magnetic properties and may damage the induction hob. Try using a suitable pan. The error should automatically cancel after 8 seconds, allowing you to use the cooking area again. If any other errors occur, change the pan, and if the issue persists, contact After-Sales Service.
What to do if the fan on my Smeg Hob is not working?
If the fan of your Smeg Hob is not working, check the fan cable. Connect the cable.
Why does my Smeg Hob make an acoustic signal upon ignition?
If you hear an acoustic signal upon ignition of your Smeg Hob, and no error code is displayed, it could be due to a damaged or badly connected LIN cable to the hood electronic board. Check the connection. If the error persists, please contact After Sales Service.
To Next Page
General
