Smeg HOBD472D2 - Technical Data

E8
Cooking areas are turned
off.
Fan fault.
Fan blocked by dust or fibres.
Clean and remove foreign bodies
from the fan.
If the error persists, please contact
the After-Sales Service.
E4
E5
E7
E9
ER20
ER22
ER31
ER36
ER42
ER47
EA
EH
Disconnect the hob from the power supply.
Wait a few seconds, then reconnect the hob to the power supply.
If the problem persists, call the After Sales Service and specify the error code that appears on the dis-
play.
Fan not working. Fan cable unplugged. Connect the cable.
Hood not working. Power cable.
Cable unplugged.
Reconnect the hood power cable
found towards the front right under-
neath the hob.
TC = TOUCH CONTROL
UI = USER INTERFACE
NTC = TEMPERATURE SENSOR
17. TECHNICAL DATA
Product identification
Type: 4300
Model: HOBD482D2
Model: HOBD472D2
Please see the identification plate af-
fixed to the bottom of the product.
The manufacturer makes continual im-
provements to products. For this
reason, the text and illustrations in these
instructions for use may change without
warning.
Further information on the technical
data is available on the website:
www.smeg.com
MODEL HOBD482D2
MODEL HOBD472D2
Total maximum power (hob and
hood)
7.62 Kw (basic setting)
Total maximum power (hob and
hood)
4.72 Kw
Total maximum power (hob and
hood)
3.72 Kw
Total maximum power (hob and
hood)
3.02 Kw
1,2 Flexible cooking area 1 + 2 In bridge
3,4 Flexible cooking area 3 + 4 In bridge
Parameter Value Dimensions
(mm)
HOBD482D2
Working dimensions
- 830 × 520 (W x
D)
HOBD472D2
Working dimensions
- 700 × 520 (W x
D)
Power supply
voltage/frequency
220-240 V, 50 Hz; 220
V, 60 Hz 3N~ / 2N~
380-415 V, 50 Hz;
3N~ / 2N~ 380 V, 60
Hz
32