Smeg HOBD472D2 - Page 17

1,2 Flexible cooking area 1 + 2 In bridge
3,4 Flexible cooking area 3 + 4 In bridge
Parameter Value Dimensions
(mm)
Electrical and heating element data
Cooking area
1,2,3,4
2100 W; Power Boost:
3000 W
210 x 190
Flexible cooking
area
1+2, 3+4
3000 W; Power Boost:
3700 W
210 x 380
Parameter Value Dimensions
(mm)
Weight of the device 21 kg
Number of cooking
areas
4
Heat source induction
18. MAINTENANCE -
REPAIR AND
CONFORMITY
• Make sure that maintenance on elec-
trical components is only carried out
by the manufacturer or by the service
technicians.
• Make sure that damaged cables are
only replaced by the manufacturer or
by the service technicians.
When contacting the service depart-
ment, please provide the following in-
formation:
• Type of fault
• Device model (Art./Cod.)
• Serial number (S.N.)
This information can be found on the
identification plate. The identification
plate is affixed to the bottom of the
device.
Information on the product pursuant
to EU regulation no. 66/2014
Reference standards:
EN/IEC 60350-2
EN/IEC 50564
This appliance has been designed,
manufactured and sold in compliance
with the EEC directives.
33