EasyManua.ls Logo

Smeg HOBD482D - Page 13

Smeg HOBD482D
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Timer (generic)
Countdown with alarm for generic use.
To activate: with the hob turned on and with no pans present,
press the Digits in the Timer controls area one at a time,
setting the values individually by selecting them on the power
bar (Minimum 1 minute - Maximum 99 minutes).
The Display in the Timer management controls area shows the
countdown, if it has been set. Otherwise it displays C L as
standard.
To deactivate: set the timer values to zero or press twice
with the hob turned o󰀨.
Hotplate function
to keep food warm
To activate: select one of the 4 cooking areas and press .
The Digit for the selected area will show
To deactivate: press or press .
Turbo function
Both the cooking areas and the Hood can be set to extra
power.
To activate: both for the hood and for the cooking areas,
press 9 on the power bar 2 times. The corresponding Digit
displays .
To deactivate: select one of the other possible values on the
power bar.
Quick heating
function
Select one of the 4 cooking areas and press and hold for 3
seconds on the selected value (from 1 to 8) on the power bar.
The hob will peak at maximum power for 15 seconds before
returning to the set power for a given time, after which it will
switch o󰀨 (See table below).
The Display shows A plus the selected value.
1 -> 40 seconds
2 -> 72 seconds
3 -> 120 seconds
4 -> 176 seconds
5 -> 256 seconds
6 -> 432 seconds
7 -> 120 seconds
8 -> 192 seconds
9 -> not available
P -> not available

Other manuals for Smeg HOBD482D

Related product manuals