Smeg HOBD482D - Page 14

36
Function
Pause + Restart
This function freezes all the hob settings for approximately 10
minutes if the person using the hob needs to go away for a short
time.
During the pause:
- No energy is being used in any of the cooking areas.
- All the Timers are stopped.
- The “Turbo“ and “Quick Heating“ functions are deactivated
When the 10 minutes are up, the hob will continue with all the
actions that were set previously.
To activate: press and hold for at least 1 second. All the Digits
indicate
To deactivate: press and hold for at least 1 second until it
ashes. Press any other button within 10 seconds.
Recall Function
This function is used to recall all the hob function settings in the
event of involuntary shut-down or a sudden power cut.
When the hob is turned o󰀨, if it is not turned on again within
6 seconds using , the button will ash for 6 seconds.
Press the button to recover the functions set previously. A
beep sounds to conrm the operation.
With the hob turned o󰀨, if it is turned on again within
6 seconds the previous function settings are recovered
automatically.
Bridge Function
This function allows 2 cooking areas to be connected, so that
they can be controlled as a single, large cooking area. This
means it is possible to use pans with a larger bottom.
To activate: with the hob turned on, simultaneously press the
required buttons to select the 2 areas to form a bridge, until
a Digit displays to indicate that the function has been
activated.
The other Digit is used to set the power level.
Warning: The left cooking areas cannot be connected to the
right ones, and vice versa.
To deactivate: simultaneously press the buttons that have been
used to create the bridge, until the symbol disappears.
Automatic pan
detection function
If a pan is placed on one of the cooking areas, the hob
detects it automatically and lights up the corresponding Digit at
maximum intensity, displaying .
Residual heat
indicator
The residual heat indicator is a safety feature, indicating that
the surface of the cooking area is still at a temperature of 60°
C or above, which may cause burns if touched by a naked
hand.
The Digit for the corresponding cooking area displays .