EN
6. ADDITIONAL INFORMATION FOR THE USER
The following information is provided in accordance with the European Ecodesign regulation (EU)
2019/2023
The values indicated for programs other than Eco 40-60 are indicative only.
Washing machine
Cycle Rated
capacity
(kg)
Energy
consum-
ption
(kWh/
cycle) *
Water
consum-
ption
(l/cycle) (*)
Programme
duration
(h:min)*
Temperature
Max.
(°C)
5 min (*)
(***)
Spin
speed
(rpm) *
Residual
moisture
content
(%) *
Detergent
Eco 40-
60**
7 1.02 49 2:50 46 1400
(1200)
(1000)
48
(55)
(61)
Washing
powder or
liquid deter-
gent for co-
lours, wi-
thout bleach
or optical
brighteners
For white
and light-
coloured
laundry, use
a
Standard
detergent
with white-
ners.
(from cold
wash up to
90°C).
Refer to the
programs
table
Eco 40-
60**
3.5 0.70 43 02:40 36 1400
(1200)
(1000)
49
(56)
(62)
Eco 40-
60**
2 0.50 39 02:30 32 1400
(1200)
(1000)
54
(60)
(65)
Cotton
20°C
7 0.24 62 01:51 20 1400
(1200)
(1000)
53
(57)
(63)
Cotton
40°C
7 0.38 62 01:51 40 1400
(1200)
(1000)
53
(57)
(63)
Cotton
40°C +
Prewash
cycle
7 1.02 78 02:18 40 1400
(1200)
(1000)
53
(57)
(63)
Cotton
60°C
7 1.11 62 01:51 55 1400
(1200)
(1000)
53
(57)
(63)
Easy care
40°C
3.5 0.62 50 01:43 40 1000 30 Detergent for
colours /
delicates wi-
thout optical
brighteners
Mixed
load 40°C
3 0.40 36 00:50 40 1200 57 Standard
detergent
without whi-
teners
Wool
30°C
2 0.20 49 00:47 30 600 55 Detergent for
woollens
* The actual values may differ from those indicated due to the pressure, hardness and temperature of the inlet water, the ambi-
ent temperature, the type, amount and soiling of laundry, the type of detergent, fluctuations in the mains power supply and any
additional functions that have been activated.
** Test programme compliant with European Ecodesign regulation (EU 2019/2023) and the European regulation on energy la-
belling using cold water (15°C) (EU 2019/2014)
*** Maximum temperature reached for a minimum of 5 minutes inside the laundry being treated.
IMPORTANT NOTICE FOR TESTING INSTITUTES.
Models intended to be built into a cabinet must be tested in an approved test cabinet with the front panel mounted in accord-
ance with the manufacturer's installation instructions.