Smeg LBW508CIT - Washing Quality and Foam Issues

EN -72-
CHAPTER -9: TROUBLESHOOTING
Excessivefoamis
formedinthedetergent
drawer.
Excessiveamount
ofdetergentused.
PressonStart/Pause
button.Toeliminatefoam
formation,mixaspoon
ofsoftenerwithhalf
litresofwater,andpour
themixtureinthedeter-
gentdrawer.After5-10
minutes,PressonStart/
Pausebuttonagain.In
yournextwashingopera-
tion,Adjustthedetergent
doseaccordingly.
Usedetergentspro-
ducedonlyforautomat-
icwashingmachinesin
yourmachine.
Wrongdetergentused.
Thecontaminationde-
greeofyourlaundries
doesnotmatchthe
programmeyouhave
chosen.
Selecttheprogramme
appropriateforthe
contaminationdegree
ofyourlaundries.(See
programmetable)
Adjusttheamountof
detergentbasedonthe
amountandcontami-
nationdegreeofyour
laundries.
Amountofdetergent
usedinsufcient.
Laundriesinex-
cessofmaximum
capacityputinyour
machine.
Loadyourmachinewith
laundries,amountof
whichwillnotexceed
maximumlaundryca-
pacity.
Unsatisfactorywashing
result.
FAULT
POSSIBLE
CAUSE
TROUBLE-
SHOOTING