Cleaning and Maintenance
52
3.3 Cleaning the door
Removing the door
To facilitate cleaning, we recommend that
you remove the door and place it on a
towel.
To remove the door, proceed as follows:
1. Open the door completely and insert two
pins into the holes in the hinges, as
shown in the image.
2. Grasp the door on both sides with both
hands. Lift it, forming an angle of about
30°, and remove it.
3. To remount the door, insert the hinges into
the slots on the oven, making sure that the
grooves A fit tightly in the slots. Lower the
oven door and once it is in position,
remove the pins from the holes in the
hinges.
Cleaning the door glazing
We recommend always keeping the glass
doors thoroughly clean. Use paper towels.
If there are tough to clean spots, use a
damp sponge and regular detergent.
We recommend using cleaning
products distributed by the
manufacturer.
To Next Page
Loading...
Need help?
General
