EasyManua.ls Logo

Smeg P791 - Appliance Maintenance and Care; Grease Filter Cleaning and Replacement; Charcoal Filter Replacement Schedule; LED Lamp Replacement Procedure

Smeg P791
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
timer function, press the button again ONCE.
Replacing the grease filters: special attention must be given to the grease filters which must be periodically cleaned
and must be cleaned periodically every two months, whenever the grease filter alarm trips. For instructions of the
filter Alarm, refer to the Controls paragraph. Remove the grease filters in correspondence with the handle, push the
stop inward and pull the filter downwards (Fig. 4). Wash them with a normal neutral product in commerce, then rinse
abundantly and dry. The washing can be carried out in the dishwasher making sure not to let the filters make contact
with dirty or silver dishes. Remount the grease filters.
Replacing the charcoal filters (Fig. 8): for filtering hoods, the charcoal filters must be replaced, on the average
once every 6 months, when the charcoal filter alarm trips. For instructions on the filter Alarm, refer to the Controls
paragraph. To get to the round filters, take off the anti-grease filters pushing the catch upwards in correspondence
to the handle; remove the charcoal filters from the motor block making them rotate.
Lighting (Fig. 10): To change the led lamp levering from the proper slots. Replace with bulbs of the same type.

Related product manuals