12.5 Removing the shelf guides
1. Unscrew and remove the knurled nuts 1 in the front of the shelf
guides in an anti-clockwise direction.
2. Unscrew and loosen the knurled nuts 2 in the back of the shelf guides
in an anti-clockwise direction. Do not completely remove these nuts.
3. Pull the shelf guides to the inside of the cavity and remove from the
front.
To put them back, insert the shelf guides into the knurled nuts 2 in the
back and position on the screws in the front.
Screw the knurled nuts 1 and 2 in a clockwise direction till tight.
To Next Page
Loading...
