What to do if the Smeg SCV38X display does not light up?
If your Smeg Oven display isn't lighting up, there could be a couple of reasons. First, ensure the oven is properly connected to a power source and that the fuse is working correctly. If the oven is receiving power and the display still doesn't light up, it could indicate a problem with the electronic board.
Why is the Smeg SCV38X light not working?
If the oven light in your Smeg oven isn't working, there are a couple of potential causes. It could simply be that the light bulb has burned out and needs replacing. Alternatively, the oven might not be properly connected to a power source, or the fuse may have blown. In this case, connect the oven or replace the fuse.
What to do if there is a water or steam leak around the door during cooking in Smeg SCV38X Oven?
If you notice water or steam leaking around the door of your Smeg oven during cooking, it could be due to the door not being properly closed, or the door seal may be defective.
General| Type | Built-in |
|---|---|
| Oven Type | Electric |
| Number of Ovens | 1 |
| Energy Rating | A |
| Colour | Stainless Steel |
| Interior Light | Yes |
| Thermostat Range | 50 - 250°C |
| Cleaning System | Catalytic |
| Power Supply | 220-240 V |
| Control Type | Rotary dials |
To Next Page
