Smeg SF106 User Manual

Cleaning and maintenance
86
4.6 Pyrolytic (on some models only)
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. Press and turn the function knob to
select the Eco Pyrolytic or Pyrolytic
function.
2. The duration of the Pyrolytic cycle will
appear on the display.
3. Press and turn the programming knob to
set the Pyrolytic cycle duration from a
minimum of 2 hours to a maximum of 3
hours (except for the function
whose duration is 2 hours).
4. Press the programming knob to confirm
the values entered.
5. Press the function knob to start the
Pyrolytic cycle.
Pyrolytic cleaning is an automatic
high-temperature cleaning
procedure which causes dirt to
dissolve. Thanks to this process, it is
possible to clean the inside of the
oven very easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
•Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.

Smeg SF106 Specifications

General

Brand	Smeg
Model	SF106
Category	Oven
Language	English