Smeg SIB2741D - Page 9

28 - USE 91477A677/A
2. Use the button to reset the power level
to 0 (zero).
If a pan that is not suitable for induction cooking
is placed on an active zone or if there is no pan,
the zone will not deliver power and its display
will show the symbol alternating with the
power level.
Power level table
The power in the cooking zones can be
adjusted to various levels. In the table below
you will find instructions for the different types of
cooking.
Booster function
The Booster function allows you to heat a pan at
maximum power for a limited amount of time. It
can be used to bring a large amount of water to
the boil rapidly.
After selecting a zone:
1. Set the power level to 9.
2. Press the button again; the symbol
will be shown on the display.
To deactivate the Booster function, simply
decrease the power level of the cooking zone
or switch off the appliance.
Timed cooking
This function is used to program the automatic
switch-off of each cooking zone at the end of a
period of time set by the user (from 1 to 99
minutes).
To set a timed cooking:
1. Place a pan on a cooking zone and select
a power level for a zone.
2. Select the relative cooking zone.
3. Press the and buttons together.
4. The symbol will appear on the display
of the zone selected.
5. The flashing symbol appears between
the and buttons.
6. Use the and buttons to select the
required time; press and hold to advance
more quickly.
7. Press the and buttons at the same
time to cancel the function.
• Hold the button down for at
least 2 seconds to switch off all
cooking zones at the same time.
• A zone can be switched off quickly
by pressing the and buttons
at the same time.
Power level Suitable for:
0 OFF setting
from 1 to 2
Cooking small amounts of food
(minimum power)
from 3 to 4 Cooking
from 5 to 6
Cooking large quantities of food,
roasting larger portions
from 7 to 8 Roasting, slow frying with flour
9Roasting
P
Bring a large amount of water to
the boil (maximum power, see
"Booster function")
See General safety instructions.
The Booster function remains active for
a maximum of 10 minutes, after which
the power level of the zone returns to 9.
This function can be activated on
multiple cooking zones at the same
time.
The time can be changed at any
moment by following the above
procedure.
The timer cannot be activated if the
power level of the selected cooking
zone is zero (0).