What to do if Smeg ST4107 displays error E6?
If your Smeg Dishwasher displays error E6, it means the appliance isn't pumping out water correctly. Ensure the drain hose isn't kinked or crushed, and that the siphon and filter aren't blocked. If the issue continues, contact after-sales service.
Why Smeg ST4107 displays error E5?
If your Smeg Dishwasher shows error E5, it indicates that the appliance is not taking in water or is not doing so correctly. Check that the water connections are correct, the water intake tap is turned on, and the filter is not fouled. If the problem persists, contact the after-sales service.
What to do if Smeg ST4107 Dishwasher displays error E2?
If your Smeg Dishwasher displays error E2, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact after-sales service.
What to do if Smeg ST4107 displays error E4?
If your Smeg Dishwasher displays error E4, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact after-sales service.
What to do if Smeg ST4107 Dishwasher displays error E7?
If your Smeg Dishwasher displays error E7, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact after-sales service.
What to do if Smeg ST4107 displays error E8?
If your Smeg Dishwasher displays error E8, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact after-sales service.
What to do if Smeg ST4107 displays error E3?
If your Smeg Dishwasher displays error E3, repeat the washing program. If the problem persists, contact after-sales service.
General| Brand | Smeg |
|---|---|
| Model | ST4107 |
| Category | Dishwasher |
| Language | English |
To Next Page
