What to do if my Smeg ST4108 Dishwasher has a water intake malfunction?
If your Smeg Dishwasher is showing an E5 error due to a water intake malfunction, first ensure that the water connections are correctly installed and that the water intake tap is fully open. Also, check the filter for any fouling or blockages. If the issue continues after these checks, further assistance is needed.
What to do if my Smeg ST4108 has a water pump-out malfunction?
If your Smeg Dishwasher displays an E6 error indicating a water pump-out malfunction, verify that the drain hose isn't kinked or crushed, and check the siphon and filter for any blockages. If the problem persists after these checks, further assistance is needed.
Why is my Smeg ST4108 Dishwasher not heating water properly?
If your Smeg Dishwasher is experiencing a water heating malfunction (error E3), try repeating the wash program. If the problem continues, further assistance is needed.
What to do if my Smeg ST4108 Dishwasher has a water temperature monitoring malfunction?
If your Smeg Dishwasher shows an E4 error, indicating a water temperature monitoring malfunction, interrupt the current program and switch off the dishwasher. Then, switch it back on, reprogram it, and start the wash cycle again. If the problem continues, further assistance is needed.
What to do if my Smeg ST4108 Dishwasher has a turbine flow-regulator malfunction?
If your Smeg Dishwasher is showing an E7 error, which indicates a turbine flow-regulator malfunction, interrupt the program and switch the dishwasher off. Then, switch it back on, reprogram it, and start the wash cycle again. If the problem continues, further assistance is needed.
What to do if my Smeg Dishwasher has an alternate washing system malfunction?
If you encounter an E8 error on your Smeg Dishwasher, signaling an alternate washing system malfunction, interrupt the program and switch the dishwasher off. Switch it back on, reprogram it, and start the wash cycle again. If the problem persists, further assistance is needed.
What does E2 mean on my Smeg ST4108?
If your Smeg Dishwasher displays an E2 error related to the safety level, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, further assistance is needed.
General| Brand | Smeg |
|---|---|
| Model | ST4108 |
| Category | Dishwasher |
| Language | English |
To Next Page
