13
3.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
HALF LOAD WASH SETTING (3 buttons models)
This function is ideal for small loads and saves
water and electricity. It is controlled by the
HALF LOAD
button
(3)
(see section “3.
Description of the controls”) and allows washing
in the upper basket only.
IMPORTANT:
at the end of the program
remember
to deactivate the function
to
ensure the next wash is not also carried out in
half load mode
by mistake
.
A cutlery basket can be placed in the upper basket, while the lower
basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the
lower basket, since the jet of water will only reach the upper basket.
User instructions
To Next Page
Loading...
Need help?
General
