EasyManua.ls Logo

Smeg STA6539L3 - User Manual

Smeg STA6539L3
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Contents
1
1. Description of the controls _______________________________ 2
2. Operating instructions __________________________________ 16
3. Cleaning and maintenance ______________________________ 31
4. Troubleshooting ______________________________________ 35
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need use your dishwasher safely, correctly and in the
most satisfactory manner.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.

Questions and Answers

  • C
    Colin AndersonAug 11, 2025
    What to do if my Smeg STA6539L3 Dishwasher shows error E6?
    • B
      Brandon PhillipsAug 11, 2025
      If your Smeg Dishwasher displays error code E6, first ensure that the drain hose isn't kinked or crushed. Also, check that the siphon and filter are not blocked. If the issue continues after these checks, contact after-sales service.
  • E
    Ebony RodriguezAug 16, 2025
    What to do if my Smeg STA6539L3 shows error E5?
    • J
      Johnny ConradAug 16, 2025
      If your Smeg Dishwasher displays error E5, verify that the water connections are correctly installed and that the water intake tap is fully open. Also, inspect the filter to ensure it is clean and free from blockages. If the problem continues, contact after-sales service.
  • W
    William GreeneAug 22, 2025
    What to do if my Smeg STA6539L3 displays error E2?
    • G
      graybrianAug 22, 2025
      If your Smeg Dishwasher shows error code E2 or E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
  • C
    Christian BakerAug 28, 2025
    What to do if my Smeg STA6539L3 displays error E4?
    • D
      debrakhanAug 28, 2025
      If your Smeg Dishwasher shows error code E4, interrupt the current program and switch the dishwasher off. Turn it back on, reprogram it, and restart the wash cycle. If the error persists, contact after-sales service.
  • T
    turnerdennisSep 4, 2025
    What to do if my Smeg STA6539L3 shows error E3?
    • A
      Alexandra DelgadoSep 4, 2025
      If your Smeg Dishwasher displays error code E3, try repeating the wash program. If the problem remains after repeating the program, contact after-sales service for further assistance.

Smeg STA6539L3 Specifications

General IconGeneral
BrandSmeg
ModelSTA6539L3
CategoryDishwasher
LanguageEnglish

Related product manuals