Why is my Smeg dishwasher not taking in water?
If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
What to do if my Smeg dishwasher has a water pump-out malfunction?
If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
What to do if my Smeg STA4648A shows a safety level error?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
What to do if my Smeg STA4648A has water temperature monitoring malfunction?
If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if my Smeg STA4648A is not heating water?
If your Smeg dishwasher is not heating water, repeat the washing program. If the issue continues, contact the after-sales service.
General| Brand | Smeg |
|---|---|
| Model | STA4648A |
| Category | Dishwasher |
| Language | English |
Guides on connecting the appliance to the water source and hose requirements.
Instructions for connecting the drain hose to a drain pipe or sink.
Details on voltage, plug type, socket compatibility, and mains wiring.
Overview of buttons, indicator lights, and their functions on the upper panel.
Explanation of available washing programs and their suitability for different loads.
Instructions for filling and using the rinse aid and detergent dispensers.
How to modify the rinse aid dispensing level based on water hardness.
Step-by-step guide to adding detergent into the dispenser.
Advice on loading dishes, pre-washing, and energy-saving tips.
Guidance on loading cutlery, lower, and upper baskets for optimal washing.
Instructions on how to change the height position of the upper basket.
Advice on cleaning surfaces, avoiding abrasives, and gasket care.
Steps to clean the filter at the water supply tap outlet.
How to remove and clean standard spray arms to prevent nozzle clogging.
How to remove and clean the travelling spray arm for maintenance.
Instructions for inspecting and cleaning the central filter unit.
Procedures for preparing the dishwasher for long periods of inactivity.
Steps to follow before using the dishwasher again after a break.
Common issues and checks for program start and water-related problems.
Checks for issues like poor cleaning, drying, streaking, or rust marks.
Details error codes E1 to E6 and their corresponding malfunctions.
Details error codes E7 to E9 and the procedure to reset alarms.
To Next Page
