What to do if Smeg Dishwasher has water intake malfunction?
If your Smeg dishwasher experiences a water intake malfunction, first ensure that the water connections are correctly installed, the water intake tap is fully open, and the filter is not blocked. If the issue continues after checking these, contact the after-sales service for further assistance.
What to do if Smeg Dishwasher has water pump-out malfunction?
If the Smeg dishwasher experiences a water pump-out malfunction, check that the drain hose isn't kinked or crushed. Also, verify that the siphon and filter are not blocked. If the problem persists, contact the after-sales service.
What to do if Smeg STA643PQ Dishwasher has water heating malfunction?
In case of a water heating malfunction in your Smeg dishwasher, repeat the washing program. If the problem persists after repeating the program, contact the after-sales service.
What to do if Smeg STA643PQ shows safety level issue?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and switch off the appliance. Then, switch the dishwasher back on, program it again, and start the washing cycle. If the problem continues, contact the after-sales service.
What to do if Smeg Dishwasher has turbine flow-regulator malfunction?
If the turbine flow-regulator malfunctions in your Smeg dishwasher, interrupt the program and switch off the dishwasher. Switch it back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if Smeg Dishwasher has alternate washing system malfunction?
If your Smeg dishwasher experiences an alternate washing system malfunction, interrupt the program and switch off the appliance. Switch the dishwasher back on, program it again, and start the washing cycle. Should the issue continue, contact the after-sales service.
What to do if Smeg Dishwasher has water temperature monitoring malfunction?
If your Smeg dishwasher experiences a water temperature monitoring malfunction, interrupt the program and switch it off. Then, switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
General| Product Type | Dishwasher |
|---|---|
| Number of Place Settings | 13 place settings |
| Delayed Start Timer | Yes |
| AquaStop Function | Yes |
| Power Consumption (off) | 0.5 W |
| AC Input Voltage | 220 - 240 V |
| AC Input Frequency | 50/60 Hz |
| Water Softener | Yes |
| Half Load Option | Yes |
| Width | 598 mm |
| Washing Programs | Eco |
| Delayed Start | Yes |
| Programs | Eco |
| Delay Start | Yes |
| Height | 820 mm |
| Inlet Hose Length | 155 cm |
| Drying System | Condensation drying |
| Dimensions (H x W x D) | 820 x 598 x 550 mm |
To Next Page
