Installation
17
2.4 Electrical connection and precautions
Check that the voltage and the frequency of the
mains match the ratings on the name plate of
the appliance positioned on the inner edge of
The plug on the supply cord and the
corresponding socket outlet must be of the
same type and meet the regulations in force.
The plug must be accessible after installation.
Never disconnect the plug by pulling on the
After
changing the supply cord, make sure that
the bracket which secures the cord is fixed
Do not use adaptors or shunt connections
in order to avoid the possibility of overheating
In the event of damage to the supply cord,
have it replaced by the manufacturer or an
Authorized Technical Service Centre
order to avoid any risk.
To Next Page
Loading...
