x Do not install your machine on a carpet or suchlike grounds.
x To ensure silent and vibration-free operation of your machine, it
should be deployed on a non-sliding and firm ground.
x Loosen the plastic adjustment nut.
x Adjust the stays upward and downward by rotating them.
x After maintaining the balance, compress the plastic adjustment nut
upward again.
x Never put cardboard, wood or suchlike materials under your
machine if you are intending to stabilize the distortions on the
ground.
x When cleaning the ground, on which your machine rests, be
careful not to disorder stays stabilization.
9
CHAPTER -3: SETTING UP
ADJUSTING ADJUSTABLE STAYS
To Next Page
Loading...
