4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME
To switch on the appliance and select the programme, proceed as follows:
1. Turn the programmes knob in either direction. This switches on the washing machine.
2. Select the washing programme. The time left to the end of the programme and the maximum recommended
weight for the selected programme alternate on the display. The symbols on the display light up to identify the
information shown.
3. The default spin speed values are shown. The initial settings can be modified using the button underneath the
sequence of spin speeds. And temperatures
4. If spin speed is set, there will be no spin cycle and the appliance will stop with the tank full. If this value
is set the appliance does not perform the final spin and the washing programme ends with water in the tank.
To Next Page
Loading...
