EasyManua.ls Logo

smev CU322 - Broiler; Electronic Ignition Broiler; Manual Ignition Broiler; Flame Regulation Broiler

smev CU322
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
US E IN STAL LAT IO N
MA INT EN AN CE
ENGLISH
11
To ignite burner, gently push-in and turn the control knob to IGNITE POSITION and maintaining the knob pushed at
the same time press the electronic ignition button (for models with the symbol affixed to the door, the ignition
button is not visible and is activated by pressing the knob down). Once the burner is alight maintain the knob in this
position for few seconds to the ensure the flame remains alight.
BROILER
- ELECTRONIC IGNITION BROILER (DEPENDING ON MODEL)
THE BROILER BURNER MUST BE IGNITED ONLY WITH THE DOOR FULLY OPEN.
IF THE BURNER DOES NOT IGNITE IMMEDIATELY, RELEASE THE KNOB WAIT FOR
AT LEAST 10 SECONDS AND IGNITE AGAIN.
AS ACCESSIBLE PARTS MAY BE VERY HOT WHEN USING THE BROILER KEEP
CHILDREN AT A SAFE DISTANCE FROM BROILER.
NEVER USE THE BROILER FOR MORE THAN 25 MINUTES. THE BROILER CANNOT BE
USED AS AN OVEN.
IF THE BURNER FLAME GOES OUT ACCIDENTALLY TURN OFF THE GAS KNOB AND
WAIT ONE MINUTE BEFORE RE-IGNITING.
IF THE BURNER DOES NOT IGNITE IMMEDIATELY REPEAT IGNITION AFTER
HAVING FOLLOWED EACH STEP BELOW:
• PROCEED WITH MANUAL IGNITION
• CHECK THERE IS SUFFICIENT GAS IN THE GAS BOTTLE.
IF THE APPLIANCE STILL DOES NOT IGNITE SHUT OFF THE GAS SUPPLY AT THE
MAIN GAS TAP AND CONTACT YOUR LOCAL DEALER.
VISUAL FLAME CONTROL
Propane: The flames internal tongue should be blue and the outline well defined.
- FLAME REGULATION BROILER (only for models CU401 and CU402)
To adjust flame simply turn burner knob to the desired cooking flame.
To ignite burner, gently push-in and turn the control knob to IGNITE POSITION and maintaining the knob pushed at
the same time light the burner with a match or gas lighter. Once the burner is alight maintain the knob in this position
for few seconds to the ensure the flame remains alight.
IF THE BURNER DOES NOT IGNITE IMMEDIATELY CHECK THERE IS SUFFICIENT
GAS IN THE GAS BOTTLE.
IF THE APPLIANCE STILL DOES NOT IGNITE SHUT OFF THE GAS SUPPLY AT THE
MAIN GAS TAP AND CONTACT YOUR LOCAL DEALER.
- MANUAL IGNITION BROILER
Manual ignition when the appliance is not fitted with the electronic ignition feature or in the event of failure in the
electronic ignition.

Related product manuals