Need help?Do you have a question about the Smith-Root LR-24 and is the answer not in the manual?
General| Brand | Smith-Root |
|---|---|
| Model | LR-24 |
| Category | Fishing Equipment |
| Language | English |
Describes the main components and features of the LR-24 electrofisher unit.
Details the function of each key on the LR-24 display panel.
Explains the status display showing shocking time and battery condition.
Describes the status display showing power, voltage, and current readings.
Details the display of output waveform types, frequency, and voltage settings.
Explains how to use the Volts key to adjust output voltage settings.
Describes how to set and adjust the output frequency of the electrofisher.
Explains the function of the Duty Cycle key and how to adjust pulse width.
Details the function of arrow and enter keys for navigation and selection.
Allows recalling and saving electrofisher settings.
Accesses additional functions like timer reset, quick setup, and diagnostics.
Allows setting up and switching between two output waveforms and voltages.
Selects the method for controlling maximum average output power.
Manages internal heat by automatically reducing output frequency or voltage.
Temporarily overrides the Anode-Out-of-Water safety feature.
A diagnostic test mode for technicians to check system operations.
Resets all settings to the original factory defaults.
Allows review of stored error and event codes for troubleshooting.
Sets a pre-set output limit for safety considerations.
Selects the output waveform type: DC, Standard Pulse, or Burst of Pulses.
Explains the complex waveform setup involving cycle and burst frequencies.
Step-by-step guide for configuring the Burst of Pulses waveform.
Details how to open, access, and close the battery compartment.
Describes the various connectors for battery and cables.
Describes critical safety mechanisms like the emergency switch and quick release.
Explains the function of the flashing red LED and audio alarms.
Lists essential safety practices and prohibitions for electrofishing.
Details the different audio tones and their meanings for various operating conditions.
Explains the anode pole switch and its shutdown control.
Describes sensors that shut off output if unit is tilted or immersed.
Explains safety features related to electrode position and voltage detection.
Protects the unit from excessive battery drain by shutting off power.
Discusses thermal shutdown, interlocks, and fusible links for protection.
Describes errors for peak/average current overloads and IGBT failure.
Explains how temperature affects alarms and display during operation.
Explains errors for inverter overload and low battery conditions.
Describes error for a problem with the input current sensing circuit.
Step-by-step guide for initial setup of the electrofisher unit.
Describes the process of running the Quick Setup function for initial configuration.
Guidance on adjusting settings for optimal fish taxis and tetany.
Crew roles and preparation before starting electrofishing operations.
Procedure for loading stored or default waveforms for electrofisher setup.
Lists the 10 pre-set waveform configurations for the LR-24.
Step-by-step guide for manually selecting waveform, voltage, frequency, and power limit.
Details the setup procedure for a gated burst waveform.
Explains how to set up and switch between two different output waveforms and voltages.
Instructions for saving custom waveform setups to the LR-24 memory.
Provides detailed technical specifications for the LR-24 electrofisher.
Instructions and precautions for charging LR-24 batteries using the UBC-24 charger.
Step-by-step guide for connecting and charging batteries with the UBC-24.
Information on 24V batteries, their life, and proper maintenance.
Guidelines for storing batteries and maintaining the charger.
Details on battery rating, lifespan, storage, and temperature impacts.
Describes the MC-24 charger and BAT-01 tool for battery maintenance and testing.
Emphasizes inspection of all electrical equipment before field operations.
Checklist of critical safety checks for electrofishing equipment.
Explains how electrical current causes damage and factors influencing danger.
Details the direct physiological impacts of electrical shock on the body.
Lists essential PPE for electrofishing, including gloves and waders.
Guidelines for team roles, responsibilities, and accident response.
Methods to avoid shock by ensuring proper insulation and circuit completion.
Key operational practices for safe electrofishing use.
Illustrates the procedure for quickly detaching the electrofisher backpack.
Defines key terms used in the LR-24 electrofisher manual.
Lists and describes LR-24 event codes, their display messages, and how they are cleared.
Instructions for cleaning the anode ring and problems with nets.
Lists the 10 pre-set waveform configurations for the LR-24.
Provides guidance on correctly adjusting the LR-24 suspension system for comfortable wear.
Step-by-step instructions for adjusting the LR-24 backpack suspension system.
Instructions for cleaning the LR-24 enclosure and suspension system.
Details the service contract for equipment maintenance, repairs, and calibration.
Chart to convert settings from older models (12/15) to the LR-24.
Procedure for testing the electrofisher pole and its electrical connections.
Steps to test the cathode cable resistance and integrity.
Illustrates a typical setup with safety gear and proper cord management.
Shows how to arrange accessories in a carry case for protection during transport.
To Next Page
