Smiths detection HI-SCAN 100100V-2is - User Manual

Conventional X-ray Inspection Units HI-SCAN
with HiTraX Electronics
User's guide for users with
supervisor access level
All rights reserved!
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be
liable for damages.
All rights, including rights created by patent grant or registration of a
utility model or design, are reserved. Modifications reserved.
95584681 01/01/09 © Smiths Heimann
SMITHS HEIMANN
www.smithsdetection.com

Smiths detection HI-SCAN 100100V-2is Specifications

General

Maximum Conveyor Load	200 kg
Max Load Capacity	200 kg
Scan Speed	0.2 m/s
X-ray generator anode voltage	160 kV
Technology	Dual-energy X-ray
Conveyor Speed	0.2 m/s
Tunnel Dimensions	1000 mm x 1000 mm
Max. Object Size	1000 mm (W) x 1000 mm (H)
Power Supply	50 Hz / 60 Hz
Usage	Cargo and baggage screening

Summary

Guide for users with operator access level

How to ensure safety

Essential safety instructions and warnings for operating the X-ray unit.

How to start and terminate your work

Procedures for safely starting up and shutting down the X-ray inspection unit.

How to carry out inspections

Detailed steps and guidelines for performing X-ray inspections correctly.

How to correct operating troubles

Troubleshooting guide for common operating issues and error messages.

Additional guide for users with supervisor access level

How to log in

How to set the login procedure

How to manage user data

How to manage the access rights* for users with lower access level

Defining and assigning access rights to menus and functions for lower access levels.

How to manage ISIS cards*

How to set the scanning functions

How to set the Automatic detection*

How to set the recheck* or the external image evaluation*

How to work with the IMS image store system*

How to configure the HI-TIPPLUS* and the aTIP* system

Setting up threat image projection libraries and parameters for TIP/aTIP systems.

How to configure the OTS XTrain system*

Configuring training sessions and image projection for operator training via OTS XTrain.

How to work with TIP* and OTS XTrain* reports

How to configure the Xport image transfer system*

How to calibrate* the HI-SCAN X-ray unit

Procedure for calibrating the X-ray unit's material detection system.

How to generate the Diagnosis report

Other operating troubles

Troubleshooting guide for issues with TIP/OTS systems, data carriers, and memory.