To Next PageTo Next Page
Need help?Do you have a question about the Smiths detection HI-SCAN 6040i and is the answer not in the manual?
General| Conveyor Speed | 0.2 m/s |
|---|---|
| X-ray Generator Anode Voltage | 160 kV |
| Weight | Approx. 400 kg |
| Type | X-ray scanner |
| Application | Baggage and cargo inspection |
| Technology | Dual energy X-ray |
| X-ray Generator Direction | Downwards |
| Image Processing | Real-time image processing |
| Power Requirements | 220-240 V, 50/60 Hz |
| Power Supply | 230 VAC ±10% / 50 Hz - 60 Hz |
| Film Safety | Guaranteed up to ISO 1600 (33 DIN) |
| External Dimensions | Approx. 2000 mm (L) x 1000 mm (W) x 1400 mm (H) |
| Max. Conveyor Load | 160 kg (353 lbs) evenly distributed |
Covers safety precautions, warning signs, and compliance with regulations for operating the HI-SCAN X-ray unit.
Explains the procedures for conducting X-ray inspections, including item placement and conveyor control.
Provides guidance on identifying and resolving common operating issues, error messages, and system malfunctions.
Outlines how supervisors manage access rights for lower-level users, controlling system functions and data access.
Guides on configuring HI-TIPPLUS and aTIP systems for threat image projection and library management.
Explains how to set up and manage the OTS XTrain system for operator training sessions and image organization.
Provides instructions for calibrating the material detection and other functions of the HI-SCAN X-ray unit.
