Smiths detection HI-SCAN 7555si User Manual

Conventional X-ray Inspection Units HI-SCAN
with HiTraX Electronics
User's guide for users with
supervisor access level
All rights reserved!
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be
liable for damages.
All rights, including rights created by patent grant or registration of a
utility model or design, are reserved. Modifications reserved.
95584681 01/01/09 © Smiths Heimann
SMITHS HEIMANN
www.smithsdetection.com

Smiths detection HI-SCAN 7555si Specifications

General

Weight	Approx. 1100 kg
Conveyor Speed	0.2 m/s
Application	baggage screening
Technology	X-ray
Tunnel Dimensions	760 (W) x 565 (H) [mm]
Max. conveyor load	200 kg
X-ray Source	X-ray tube
X-ray generator anode voltage	160 kV
Image Processing	Real time
Detection Capability	Explosives
Operator Interface	user-friendly interface
Power Requirements	50 Hz - 60 Hz

Summary

Operator Access Level Guide

Operator Guide Preface

Introduction to the manual for operator access level users.

Operator Safety Instructions

Essential safety instructions and warning signs for operating the X-ray unit.

HI-SCAN Controls and Indicators Overview

Overview of the HI-SCAN X-ray unit's controls, buttons, and display elements.

Operator Work Start and Termination Procedures

Step-by-step guide on powering on, logging in, and shutting down the X-ray unit.

Operator Inspection Procedures

Procedures for placing items, controlling scanning, and handling suspect items.

Operator X-ray Image Display Modes

Details on various image display modes and functions like Zoom and X-PLORE.

Operator Operating Troubles and Error Solutions

Troubleshooting guide for common errors and system issues encountered during operation.

Supervisor Access Level Guide

Supervisor Guide Preface

Introduction to the manual for supervisor access level users.

Supervisor Login Procedures

Procedure for logging into the X-ray unit using user ID, password, or ISIS card.

Manage User Access Rights

Defines and assigns permissions for users with operator and local supervisor access levels.

Configure Threat Image Projection Systems (HI-TIPPLUS/aTIP)

Setup and configuration of threat image projection systems for training and detection.

Configure OTS XTrain Operator Training System

Configuration of the operator training system for simulating threat detection scenarios.

System Settings and Configuration

Overview and modification of system presets and user-defined configurations.