To Next PageTo Next Page
Need help?Do you have a question about the Smiths detection HI-SCAN 5180si and is the answer not in the manual?
General| Type | X-ray scanner |
|---|---|
| Technology | Dual-energy X-ray |
| Conveyor Speed | 0.2 m/s |
| X-ray Generator Anode Voltage | 140 kV |
| X-ray Generator Direction | Vertical |
| Wire Resolution | 40 AWG |
| Usage | Baggage and cargo screening |
| X-ray Generator | Sealed tube |
| Power Requirements | 230 VAC / 50 Hz |
| Image Processing | Real-time image processing |
| Detection Capability | Explosives, weapons, contraband |
| Maximum Load Capacity | 100 kg |
Introduction to the operator manual, covering usage and unit types.
Essential safety instructions, warning signs, and compliance for unit operation.
Identification of the X-ray unit's controls, buttons, and displays for proper operation.
Procedures for powering on, off, logging in, logging out, and restarting the X-ray unit.
Detailed steps for performing X-ray inspections, including object placement and scanning control.
Various modes and functions for viewing and manipulating X-ray images on the monitor.
Guidance for diagnosing and resolving common operational errors and system issues.
Introduction to advanced supervisor functions and system configuration options.
Process for logging into the system with supervisor credentials or ISIS cards.
Defining and assigning permissions for operator and lower-level users within the system.
Configuration of system parameters, keys, language, and display settings for optimal use.
Procedures for performing material detection calibration for accurate X-ray unit performance.
Troubleshooting specific issues related to TIP, OTS, removable drives, and error messages.
Overview and management of system presets and user-defined configurations.
