How to ensure safety
Between the conveyor belt of the HI-SCAN X-ray unit
and the roller input and output conveyors*, motorized
belt conveyors* or baggage chutes* installed behind, a
safety roller is located. Check, if this roller can be
pushed down or lifted up.
A
Warning!
Obey the safety instructions of other manufacturers, if the X-ray unit is equipped with roller input and
output conveyors not manufactured by Smiths Heimann!370
What to observe when evaluating X-ray images
A
Warning!
Never work under time pressure when evaluating X-ray images. The obtained security standard de-
pends decisively upon your work. Stop the conveyors if you have not enough time to carefully evalu-
ate an image! 380
A
Warning!
Make sure only scanned and checked baggage or freight items will be forwarded or returned to the
passengers! 390
A
Warning!
Be always aware of the fact that the HI-SCAN X-ray unit generally does not automatically detect dan-
gerous items! 400
A
Warning!
Regard objects which cannot be identified as suspect and lead such objects to the recheck!
410
A
Warning!
Objects represented in black, which cannot be brightened up with the different image display modes,
always need a manual recheck. Dangerous objects might be hidden behind! 420
95587412 01/01/09 © Smiths Heimann
A
Warning!
The roller must not be fixed in any way. Other-
wise, injuries may be caused when hands are
put in the gap between the conveyors! 360
1-10
To Next Page
Loading...