D
DmitryJul 6, 2025
The bios support battery does not work. The system does not boot after replacing it.
To Next PageTo Next PageThe bios support battery does not work. The system does not boot after replacing it.
General| Type | X-ray scanner |
|---|---|
| Conveyor speed | 0.2 m/s |
| X-ray generator anode voltage | 160 kV |
| Operating temperature | 0 °C to 40 °C |
| Penetration (steel) | 35 mm |
| Film safety | ISO 1600 |
| Power supply | 230 VAC |
| Spatial Resolution | 1.0 mm |
Details warning signs in instructions and on the unit for safety.
Emphasizes compliance with applicable radiation and accident prevention regulations.
Provides crucial safety instructions for operating the X-ray unit.
Details restarting after an emergency stop and user login procedures.
Explains logging out and the procedure for switching off the unit.
Guidelines for correctly placing items on the conveyor belt for inspection.
Covers marking suspect items and transferring images to recheck stations or archives.
Addresses issues with switching on the unit or it switching off automatically.
Details the login procedure and management of user data and access rights.
Covers configuration of operating options, scanning functions, automatic detection, and system settings.
Details configuration of HI-TIPPLUS, aTIP, and OTS XTrain systems for threat projection.
Instructions for calibrating the X-ray unit and handling operating troubles.