TRAK MODEL 9100 MODULAR FREQUENCY/TIME SYSTEM
TM4400013 Rev, D
i
REV DESCRIPTION DATE APPROVED
D Initially Released at Revision D 061031
STATIC AWARENESS
The 9100-8 Modular System contains CMOS IC’s that can be damaged by electrostatic discharge during handling. The
following practices minimize the likelihood of CMOS IC damage:
1. Use a static-free work station.
2. Avoid PLASTIC, VINYL, and STYROFOAM in work area.
3. Discharge personal static before handling. Use a grounded antistatic wrist strap.
4. Minimize handling. Do NOT remove and replace IC’s by hand.
5. Use grounded IC removal and insertion tools
6. If required, handle the IC’s only by the body - NOT by the leads. Use grounded wrist strap.
7. Do not slide the IC over any surface.
To Next Page
Loading...