TRAK MODEL 9100 MODULAR FREQUENCY/TIME SYSTEM
3-11
TM4400013 Rev D
Examples of remote interface command.
1. Request time mode from primary GPS Reference module using the STM command.
Host sends: A.STM <CR>
9100 replies: A.STM U <CR><LF>
2. Request time mode from backup GPS Reference module using the STM command.
Host sends: B.STM <CR>
9100 replies: B.STM U <CR><LF>
3. Set Time mode to UTC on primary and backup GPS Reference modules
Host sends: STM U <CR>
9100 replies: D.STM DONE <CR><LF>
A list of available request status commands and setup commands with descriptions and factory default
parameters are provided in Table 3-1 and 3-2 respectively.
To Next Page
Loading...