TRAK MODEL 9100 MODULAR FREQUENCY/TIME SYSTEM
3-23
TM4400013 Rev D
Set/Request On-line source
In request mode, this command provides the status of the FSU front panel SELCT switch. In set mode the
command duplicates the front panel selection.
Warning: If changing the setting from “T” to “A” or “B” will override the automatic switchover function.
Request mode:
Host sends: SOS<CR>
9100 replies: SOS S<CR><LF>
Where: S is T for auto
S is A for source A
S is B for source B
Set mode:
Host sends: SOS S<CR>
9100 replies: SOS DONE<CR><LF>
Where: Same as for SOS request mode
Fault Reset command
This command will attempt to clear any Model 9100 latched failures.
Set mode:
Host sends: FRST <CR>
9100 replies: FRST DONE<CR><LF>
To Next Page
Loading...