11
Auxiliary 12v Power Post
XRC Gen3 winches feature an auxiliary positive power post on the control box for quick use of 12 volt
accessories with out popping the hood. Perfect for powering small items such as an air compressor.
Power post is protected with a 50-Amp automatic circuit breaker. In case of a ground short, or thermal
overload, the breaker will trip, it will automatically reset itself after a short period of time after the fault
is removed.
Step 1: Open cover to expose power post. (Fig 1).
Step 2: Attach accessory positive lead to power post (Fig 2).
Step 3: Attach accessory negative lead to a suitable ground location on your vehicle.
Note: You may remove the button head bolt to connect a power wire with an eyelet.
To Next Page
Loading...
