Smoothskin bare fit IPL User Manual (English)

Sheila MontoyaJul 27, 2025

Why don't the activation button lights turn on when I place my Smoothskin bare fit IPL against my skin?

J
Jesse ColemanJul 28, 2025
The activation button lights might not illuminate for several reasons. First, ensure that the power supply is properly plugged in. Second, confirm that the skin tone sensor is fully pressed against your skin. Finally, it's possible that your skin tone is too dark for the Smoothskin Hair Removal System to operate effectively; refer to the skin tone chart to check.

Skin Tone Sensor	Yes
Device Type	IPL Hair Removal Device
Treatment Type	Hair Removal
Light Technology	IPL (Intense Pulsed Light)
Treatment Time	10 minutes for full body
Power Source	Mains Powered
Application Areas	Face

Skin Tone Sensor

Yes

Device Type

IPL Hair Removal Device

Treatment Type

Hair Removal

Light Technology

IPL (Intense Pulsed Light)

Treatment Time

10 minutes for full body

Power Source

Mains Powered

Application Areas

Face

Summary

How SmoothSkin Bare Fit Works

How IPL Works

Explains how IPL technology breaks the hair cycle and converts light energy to heat.

Important Safety Information

Contraindications for Use

Lists situations and skin types where the device should not be used.

Eye Safety Precautions

Details potential eye injury from IPL flashes and necessary safety measures.

Electrical and General Safety

Covers precautions related to the device's electrical components, water, and heat.

General Safety Guidelines

Discusses skin peels, tanned skin, tattoos, and photosensitivity for safe operation.

Usage Precautions

Discusses increased hair growth, specific body areas, and hair colours for optimal results.

Potential Risks and Side Effects

Side Effects and Reactions

Details possible skin reactions and how to assess and react to them.

Rare Side Effects

Describes very rare cases like swelling, redness, and skin colour changes.

Benefits of Using SmoothSkin Bare Fit

Clinical Trial Overview

Summarizes the clinical trial conducted to assess safety and efficacy.

Clinical Trial Results

Presents data on hair reduction percentages and subject satisfaction from the trial.

Intended Use

Product Purpose

States that the device is intended for permanent reduction in unwanted hair.

Your Suitability

Body Areas for Treatment

Specifies suitable body areas for using the SmoothSkin Bare Fit.

Skin Colour Compatibility

Details suitable skin tones and the function of the skin tone sensor.

Hair Colour Compatibility

Outlines which hair colours the device is effective on and which it is not.

How to Use SmoothSkin Bare Fit

Preparing the Treatment Area

Instructions on shaving, cleansing, and drying the area before treatment.

Performing a Test Patch

Recommends a test patch for skin reaction assessment before full treatment.

Treating with SmoothSkin Bare Fit

Step-by-step guide on using the device, including skin tone detection and activation.

Treatment Methods

Explains the 'Stamp' and 'Glide' methods for treating different body areas.

Treatment Schedule

Advises on the weekly usage frequency until desired results are achieved.

The Skin Contact Sensor

Sensor Functionality

Explains how the skin contact sensor ensures safe and effective device operation.

The Precision Head

Precision Head Usage

Describes the use of the detachable precision head for smaller, tricky areas.

Precision Head Care

Mentions safety warnings and cleaning instructions related to the precision head.

Cleaning, Maintenance, and Storage

Cleaning Instructions

Provides guidance on how to clean the handset, sensors, and treatment window.

Storage Recommendations

Advises on storing the device in a cool, dry place to prevent damage.

Troubleshooting

Common Issues and Solutions

Lists common problems with the device and their corresponding solutions.

Labels and Symbols

Product Markings

Explains various symbols and markings found on the SmoothSkin Bare Fit device.

FCC Statement

Provides the FCC compliance statement and measures to correct interference.

Technical Specifications

Device Specifications

Lists key technical details like repetition rate, optical output, wavelength, and operating conditions.

Transport Conditions

Outlines the temperature, humidity, and pressure ranges for transporting the device.

EMC Compliance

Details the EMC standards and amendments the device complies with.

Safety Standards Compliance

Lists the safety standards and amendments the device adheres to.

CE Marking and EU Directives

Explains CE marking and the EU directives the appliance conforms to.

Disposal and Recycling

Provides instructions for proper disposal of the device as medical waste.

Smoothskin bare fit IPL User Manual

Table of Contents

Questions and Answers:

Smoothskin bare fit IPL Specifications