What to do if the Smoothskin Hair Removal System activation button lights on the handset do not light up?
If the activation button lights don't illuminate, first ensure the power supply is properly plugged in. Next, make sure the Skin Tone Sensor is fully pressed against your skin. Finally, it's possible your skin tone is too dark for the Smoothskin Hair Removal System to function; compare your skin tone to the chart provided in the user guide.
What to do if my Smoothskin Hair Removal System handset lights up white but doesn't flash?
If the Smoothskin Hair Removal System handset lights up white but doesn't flash, the device might be faulty. Try unplugging it and restarting. If the issue continues, further support details are available on the website.
Why is the activation button on my Smoothskin Hair Removal System red and not working?
A continuous red light on the activation button of your Smoothskin Hair Removal System indicates a device fault. Stop using the device immediately, and further support details are available on the website.
What to do if my Smoothskin bare+ is damaged?
If any part of your Smoothskin Hair Removal System—the handset, treatment window, power supply, or cable—appears damaged, broken, or defective, DO NOT USE it. If you have any doubts about its safety or suspect damage, do not use the system and further support details are available on the website.
Key warnings regarding skin tone, tanning, and general safety for IPL use.
Essential precautions for safe operation, including electrical and hair color considerations.
Critical safety measures to protect eyes from IPL light exposure during treatment.
Introduction to the SMOOTHSKIN BARE+ and its advanced IPL technology.
Information on device suitability, gender-neutral use, and beard treatment limitations.
Explanation of IPL mechanism for breaking the hair growth cycle and preventing regrowth.
Guidance on the hair growth cycle and what to expect regarding hair reduction over time.
Step-by-step instructions for preparing the skin and device for initial treatments.
Overview of the device's sophisticated skin tone sensor and other functionalities.
Detailed guidance on how to activate the device and treat different body areas effectively.
Recommended techniques for even hair removal coverage using 'Stamp' or 'Glide' methods.
Instructions on how to properly power down and disconnect the SMOOTHSKIN BARE+ device.
Information on common and rare side effects that may occur during or after IPL treatments.
A comprehensive table for assessing side effects and recommended reactions.
Proper procedures for cleaning, maintaining, and storing the device to ensure longevity.
Practical solutions for common operational problems and device malfunctions.
Detailed technical data, including optical output, wavelength, and operating parameters.
Guidelines for environmentally responsible disposal of the device according to regulations.
Details regarding the 2-year warranty, coverage, and service claims for the device.
General| Technology | IPL (Intense Pulsed Light) |
|---|---|
| Skin Tone Sensor | Yes |
| Flash Rate | 100 flashes per minute |
| Power Source | Mains powered |
| Lamp Life | Unlimited flashes |
| Weight | 200g |
| Warranty | 2 years |
| Treatment Modes | Glide and Stamp |
| Body Areas | Body & Face |
| Skin Tone Range | I-V |
| Hair Color Suitability | Dark Blond, Brown, Black |
| Treatment Areas | Legs, Arms, Underarms, Bikini line |
| Energy Level | 4 J/cm² |
To Next Page
