What to do if the Smoothskin Hair Removal System activation button lights on the handset do not light up?
If the activation button lights don't illuminate, first ensure the power supply is properly plugged in. Next, make sure the Skin Tone Sensor is fully pressed against your skin. Finally, it's possible your skin tone is too dark for the Smoothskin Hair Removal System to function; compare your skin tone to the chart provided in the user guide.
What to do if my Smoothskin Hair Removal System handset lights up white but doesn't flash?
If the Smoothskin Hair Removal System handset lights up white but doesn't flash, the device might be faulty. Try unplugging it and restarting. If the issue continues, further support details are available on the website.
Why is the activation button on my Smoothskin Hair Removal System red and not working?
A continuous red light on the activation button of your Smoothskin Hair Removal System indicates a device fault. Stop using the device immediately, and further support details are available on the website.
What to do if my Smoothskin bare+ is damaged?
If any part of your Smoothskin Hair Removal System—the handset, treatment window, power supply, or cable—appears damaged, broken, or defective, DO NOT USE it. If you have any doubts about its safety or suspect damage, do not use the system and further support details are available on the website.
General| Technology | IPL (Intense Pulsed Light) |
|---|---|
| Skin Tone Sensor | Yes |
| Flash Rate | 100 flashes per minute |
| Power Source | Mains powered |
| Lamp Life | Unlimited flashes |
| Weight | 200g |
| Warranty | 2 years |
| Treatment Modes | Glide and Stamp |
| Body Areas | Body & Face |
| Skin Tone Range | I-V |
| Hair Color Suitability | Dark Blond, Brown, Black |
| Treatment Areas | Legs, Arms, Underarms, Bikini line |
| Energy Level | 4 J/cm² |
To Next Page
