Why is the red light on my Smoothskin Personal Care Products Pure Fit staying on?
If the first power bar indicator illuminates red and your Smoothskin Personal Care Products Pure Fit won't work, it's likely because the area you're trying to treat is too dark. SmoothSkin Pure Fit uses an intelligent skin tone sensor to optimize treatment, but it's not suitable for very dark skin due to the nature of Intense Pulsed Light technology.
How to turn on Smoothskin Personal Care Products if power bar indicators do not light up?
If the power bar indicators on your Smoothskin Personal Care Products Pure Fit handset don't light up when against your skin, ensure the power supply is plugged in and the handset is in READY mode (press the Standby/Ready button once). Also, make sure both the skin and skin tone sensors are pressed firmly against your skin.
What to do if power bar indicators are flashing in an unfamiliar pattern on Smoothskin Personal Care Products?
SmoothSkin Pure Fit uses light combinations on the power bars to show error messages. If the power bar indicators on your Smoothskin Personal Care Products are on or flashing in an unusual way, including a red LED, it signals a device fault. Stop using it and check the website for further instructions.
Why is the first power bar indicator on my Smoothskin Pure Fit Hair Removal System red?
The first power bar indicator illuminates red because the area you are trying to treat is too dark for treatment. SmoothSkin Pure Fit has an intelligent skin tone sensor that automatically detects your skin tone and selects the optimal treatment setting. Due to the nature of Intense Pulsed Light technology, SmoothSkin Pure Fit is not suitable for everyone and cannot treat very dark skin.
What to do if the power bar indicators on my Smoothskin PURE FIT Hair Removal System don't light up?
If the power bar indicators on the side of the Smoothskin Hair Removal System handset do not light up when placed against your skin, ensure that: the power supply is plugged in; the handset is in READY mode (press the Standby/Ready button once); the skin sensors are pressed against the skin; and the skin tone sensor is pressed against the skin.
What to do if my SmoothSkin Pure Fit Hair Removal System is damaged?
If the SmoothSkin Pure Fit handset, treatment window, power supply, or cable are damaged, broken, cracked, or appear defective, DO NOT USE the device. If you are in any doubt about the safety of SmoothSkin Pure Fit or suspect it is damaged in any way, it must not be used.
General| Skin Tone Sensor | Yes |
|---|---|
| Flashes | Unlimited |
| Body Attachment | Yes |
| Precision Head | Yes |
| Device Type | Handheld |
| Intensity Levels | 3 |
| UV Filter | Yes |
| Corded/Cordless | Corded |
| Warranty | 2 years |
| Technology | IPL (Intense Pulsed Light) |
| Usage Areas | Body, Face |
| Skin Tone Range | Fitzpatrick I to V |
| Treatment Time | 10 minutes for full body |
| Hair Color Suitability | Dark Blonde to Black |
Explains how light energy is transferred through the skin to disable hair follicles and promote hair growth reduction.
Lists conditions and skin types for which the device should not be used, including dark skin and tanning.
Provides crucial warnings about protecting the eyes from intense pulsed light and proper device usage around the eye area.
Details electrical precautions, such as avoiding water, damaged components, and non-approved power supplies.
Covers general safety advice, including precautions for skin peels, tattoos, photosensitivity, and medical conditions.
Highlights precautions against over-usage, treating areas with tattoos, and specific hair colours.
Instructions on preparing the skin before treatment, including shaving and cleansing the area.
Guidance on performing a patch test to check for skin suitability and adverse reactions before full treatment.
Step-by-step guide on operating the device, including plugging in, skin contact, and activation.
Recommends a treatment schedule of weekly sessions for 12 weeks, followed by monthly maintenance.
Explains how the skin tone sensor detects skin colour and adjusts power levels, indicating suitability for treatment.
To Next Page
