The Treatment Regime:
4.0 HOW TO USE
4.1 GETTING STARTED
FLASHSHAVE
PREVENTS REGROWTH
Z
Z
Z
Z
Z
Z
Z
Z
Z
Side Eects: 5.2
Keeping Continuously Smooth:
Whoa there! One step at a time...
Before your rst treatment on each new body area, test your skin (in that area) for a reaction to SMOOTHSKIN BARE+.
The Patch Test area should be approximately 3cm x 2cm (equivalent to 2 ashes side by side).
1.Follow the instructions in the ‘Getting Started’ section to begin as usual.
2. Treat the area.
3. Wait 24 hours.
4. If there’s no reaction after 24 hours, you’re good to go! The ‘patch tested area’ should NOT be re-treated for at least 1 week.
4.2 FEATURES
Skin Tone Sensor:
valid
correct