Need help?Do you have a question about the SMPro Active-1 and is the answer not in the manual?
General| Brand | SMPro |
|---|---|
| Model | Active-1 |
| Category | Controller |
| Language | English |
Information accuracy, liability, and manual updates from the manufacturer.
Instructions for checking the product and packaging for damage upon receipt.
Information about the 9V mains power supply and checking voltage compatibility.
Details on the four input connectors: RCA, 6.5mm, and USB for audio sources.
Description of the four line-level output connectors for monitors or amplifiers.
How to connect and use a footswitch for hands-free talkback activation.
Explanation of the selector switch for output level compatibility.
How to use the input selector to choose the desired input signal for monitoring.
Details on the two independent headphone amplifiers and their volume controls.
Using the DIM switch to decrease output listening level by 20dB for studio discussion.
Activating the MUTE switch to silence the signal from the outputs.
Using the MONO switch to combine stereo signals for phase check.
Explanation of the master volume control's function in adjusting audio levels.
Using the built-in talkback microphone and its effect on outputs and headphone signal.
How the monitor select switches activate outputs A & B, individually or simultaneously.
Instructions for registering the product online to ensure warranty protection.
Details on the product's three-year warranty against defects in material and workmanship.
Steps required to obtain a return authorization number for warranty service.
Conditions and exclusions for warranty repairs, including modifications and wear.
Limitations on buyer claims for damages related to warranty service failures.
Information on statutory buyer rights not excluded by the warranty terms.
To Next Page