This is simular to the VCF 1/V input but should be used for external modulation.
This is an audio input, it allows external signals (audio) to be processed by the VCF. Too much external signal will
cause the filter to over-drive or distort.
This is the audio output of the filter prior to modification by the VCA.
V
V
C
C
A
A VOLTAGE CONTROLLED AMPLIFIER
VCA CONTROLS
The signal knob controls the audio signal level coming from the VCF into the VCA. The VCA may be over-driven
(clipped) in the range of 5 - 10.
9
The VCA is an amplifier which allows its gain to be
altered by a control voltage. The VCA within the MARS
has both logarithmic and linear controls creating unique
contours.
To Next Page
Loading...