SMS MARS - VCLFO Voltage Controlled Low Frequency Oscillator; LFO Control

V
V
C
C
L
L
F
F
O
O VOLTAGE CONTROLLED LOW FREQUENCY OSCILLATOR
LFO CONTROL
The rate knob controls the speed of the modulation wave form. The LED gives a visual indication of the speed of
the VCLFO.
This output gives a positive sawtooth with an output voltage of +/-5 volts.
This output gives a negative sawtooth with an output voltage of +/-5 volts.
This output gives a square wave output of +/-5 volts
This output gives a triangle wave output of +/-5 volts
The VCLFO is a wide range oscillator used to modulate
control inputs, eg: used for vibrato, tremolo and trill. It is
internally routed to the VCO and VCF (see INTERNAL
SIGNAL ROUTE page 3).
4