Burn-In Before final calibration units are burnt-in for a minimum of 96 hours.
Power Requirements UK: 230v AC 50 Hz (220v - 240v).
Export: 115v AC 60Hz (100v - 120v).
Internal Supply +/- 12v DC 90 mA.
AC Voltage Select The MARS has an ‘AC V. SELECT’ switch. It is imperative that this is set correctly. Failure to
do so will void warranty and damage the unit beyond repair.
Warranty The SMS MARS comes with a 12 month (from purchase date) back-to-base warranty, (i.e.
customer must arrange and pay for carriage to and from SMS).
Contact Us Please don’t hesitate to get in touch with us for any enquiry:
Andy Pledger: andy@syntheticmusicsytems.co.uk
Tel. (44) 01767 681369
www.syntheticmusicsystems.co.uk
Thanks To Paula Allen (Web and Manual Design)
Ian at Action Hardware
Bob at Analogue Systems
Steve “synth-genius”
14
To Next Page
Loading...