SPECIAL REQUIREMENTS
There may be Federal or State Occupational Safety and Health Administration
(OSHA) regulations, local codes or ordinances that apply to intended usage of
internal combustion engines. Consult a local agency responsible of usage of this
type of equipment.
RISK OF INJURY
Pressure washer produces fluid pressures and velocities high
enough to penetrate human and animal flesh which could result in
serious injury or amputation.
Ensure all connections are tightened securely. Inspect all hoses to ensure they
are not damaged or kinked. Loose connections or damaged hoses can result in
injection injuries.
Ensure all fittings are properly connected. Pull on connection to ensure fittings
are secure. Improperly connected fittings can unexpectedly separate resulting
in injury.
NEVER place hands in front of nozzle.
NEVER attempt to attach or remove spray wand or hose fittings while pressure
washer system is pressurized.
DO NOT treat fluid injection injuries as a simple cut. See immediate medical
attention.
DO NOT allow pressure hose to come in contact with engine muffler.
HIGH VELOCITY fluid spray can cause objects to break, propelling particles
at high speeds.
ALWAYS wear approved safety glasses when using or doing
maintenance on pressure washers.
NEVER substitute safety glasses for GOGGLES. Injury to eyes could
occur.
ALWAYS wear protective clothing to prevent accidental spraying.
DO NOT permanently secure spray wand trigger in open position.
DO NOT use spray wand that does not have a trigger lock or trigger guard in
place and in proper working order.
12
To Next Page
Loading...
