EasyManua.ls Logo

Snap-On 870599 - SPECIFICATIONS; Max Pressure; Max Water Flow; Pump Type

Snap-On 870599
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
34
Hose
Do not allow hoses to come in contact with
engine muffler during or immediately after use.
DO NOT pull unit by pressure hose.
Engine
Do not adjust or attempt maintenance without
consulting supplied engine manual or having
adjustments made at an authorized service center.
Add stabilizer to fuel tank and let engine run for 5
minutes before storage.
Always turn on water before starting engine.
Soap/Chemicals
Use only soaps and chemical detergents designed
for pressure washer use.
Use Chemical nozzle (Black) with Soap/Chemicals.
Nozzle
Always keep nozzles unclogged.
Use ONLY chemical nozzle when using chemical
and cleaning solvents.
Storage or Winterizing
Run clean water through chemical inlet.
Add stabilizer to any remaining fuel in fuel tank.
Do not allow water to freeze in pressure pump,
spray gun, spray wand or hoses.
Max Pressure 2700 PSI
Max Water Flow 2.2 GPM
Pump Type Axial
Engine/Type Snap On XT210 /OHV
HP/RPM 7/ 3600
Displacement 207CC
Fuel/Detergent Tank Capacity 0.95 /1GAL
Pressure Hose 30 FT.
Low Oil Sensor YES
Thermal Relief Valve YES

Related product manuals