EasyManuals Logo

Snap-On CTR861 User Manual

Snap-On CTR861
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
ZCTR861NA Rev. A (01/21)
Ensure the switch is in the off position before inserting
battery pack.
Inserting the battery pack into power tools that have
the switch on invites accidents.
When battery pack is not in use, do not place it in a
clothing pocket.
Battery leakage or sparks may cause burns or fire.
Risk of short circuit and fire.
Do not short battery pack.
Do not touch the terminals with any conductive
material.
Avoid storing battery pack with conductive materials
such as nails, screws, coins, and other metallics
objects.
Do not carry battery pack in aprons or pockets that
contain conductive objects.
Short circuit can cause fire and severe burns.
Safety Rules for
Battery Disposal
The RBRC™ Seal on the lithium-ion battery contained in
this product indicates that Snap-on is voluntarily
participating in an industry program to collect and
recycle these batteries at the end of their useful life.
Snap-on’s involvement in this program is part of its
commitment to protecting our environment and
conserving our natural resources.
FCC Regulations
This device complies with Part 15, Subpart B of the
FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Risk of explosion or fire.
Do not throw away used batteries! Return your battery
to a Snap-on authorized repair center for recycling.
Explosion or flames can cause injury.
Risk of fire.
Do not attempt to disassemble the battery or remove
any component projecting from the battery terminals.
Prior to recycling, protect exposed terminals with
heavy insulating tape to prevent shorting.
Fire can cause injury.
Battery Charger Safety
Messages
Risk of electric shock and fire.
Do not insert battery pack into charger if case is cracked
or damaged.
Electric shock and fire can cause injury.
To reduce the risk of electric shock, this power cord (for
USA version) has a polarized plug, (one blade is wider
than the other.) This plug will fit in on a polarized outlet
only one way. If the plug does not fit fully into the outlet,
reverse the plug; if it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change
the plug in any way.
Use the CTC772A/CTCA772A/CTCEU772A/CTCJ772A
charger with the CTB8172BK/CTB8174 rechargeable
battery packs; Charging of any other types of batteries
may cause batteries to burst, causing injury and
damage.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
Never attempt to connect two chargers together.
Do not expose charger to rain or snow.
Pull by plug rather than cord when disconnecting
charger.
Be sure the cord is not stepped on, tripped over,
damaged, or stressed.
Risk of explosion.
Wear safety goggles, user and bystander.
Explosion can cause eye injury.
Improper use of power tools and accessories can
cause broken tools.
Before using charger, read all instructions and
cautionary markings on the charger, battery, and
product using battery.
Broken tools can cause injury.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Snap-On CTR861 and is the answer not in the manual?

Snap-On CTR861 Specifications

General IconGeneral
BrandSnap-On
ModelCTR861
CategoryBattery Charger
LanguageEnglish

Related product manuals